DRD9660-1501 Water-Based Insulating Coating: Eco-Friendly Transformer Paint for Stable, Moisture-Resistant Magnetic Cores
Keywords:
Category:
Water-Based Insulating Paint Series
Hotline:
DRD9660-1501 Water-Based Insulating Coating: Eco-Friendly Transformer Paint for Stable, Moisture-Resistant Magnetic Cores
Product features:
Safe, environmentally friendly, and non-flammable or explosive.
Excellent fastening performance—passed high- and low-temperature tests as well as a single cycle of the 85°C/85% RH (high temperature/high humidity) test, with no visible changes to the paint film.
Easily applied with tin—no need for elaborate setups; the 260°C low-temperature soldering furnace allows direct welding.
Clean appearance, no paint residue
Inductance is stable, with no fluctuations observed in high- and low-temperature tests.
Features stable overall electrical performance, no current backflow, strong voltage resistance, tightly secured winding coils, and no abnormal noise caused by current flow.
Product Performance:
Appearance: Milky white, semi-transparent liquid
Odor: Low odor
pH: 7
Viscosity: 12–15 seconds (liquid temperature at 25°C)
Solid content: 15 ± 1%
Construction process:
Paint mixing: Use directly
Varnishing: Vacuum impregnation for 5 minutes (-0.07 to 0.1 MPa), with two vacuum cycles
Vacuuming: 1–2 minutes (-0.07 MPa)
Dripping Paint: 10–30 minutes (it's best not to exceed 2 hours for the dripping process)
Baking and curing: 120°C for 4 hours or more
Note:
1. Pretend the oven's vent is a centrifugal fan—open the vent fully to speed up the release of steam, and avoid piling the product too thickly.
2. Set the oven to bake at 120°C, and during the baking process, monitor the temperature at every corner—both top and bottom—to ensure it stays above 120°C. Bake for at least 4 hours, as indicated by the thermometer.
3. The temperature of each section in the tunnel oven can be adjusted up to 120°C. (Since the tunnel oven releases steam more quickly than a bread oven and ensures more even heat distribution, products baked in a tunnel oven dry out faster compared to those baked in a conventional bread oven.)
Sales Contact:
Guangdong Shunde DADIYUAN New Materials Co., Ltd.
Address: Room 1108, Building A, Block E, Xuri Science Park, No. 6 Keyuan 3rd Road, Gaoli New Area, Ronggui District, Shunde County, Guangdong Province
Tel: 0757-28883318 Fax: 0757-26610503
Mobile: 13924577396 13923247198
Email: sales@dad1688.com
Website: www.dad1688.com
1. Due to product improvements, the manual content may change without prior notice. Please contact your sales representative to request the latest version.
2. Our company strictly adheres to relevant product standards to ensure quality and deliver products (customized products will be provided as agreed upon by both parties). Given the diverse and ever-changing conditions under which these products may be used—conditions beyond our control—we strongly advise users to conduct preliminary tests and evaluations based on the information outlined in the product manual and the recommended construction guidelines, thereby independently determining the product's suitability for their specific application needs.
Book your favorite product now!
We will contact you within one business day. Please keep an eye on your phone for our call.
Guangdong Shunde DADIYUAN New Materials Co., Ltd. is a high-tech private enterprise specializing in the research, development, and production of premium water-based insulation materials and solvent-free insulating coatings.
Product Center
Guangdong Shunde DADIYUAN New Materials Co., Ltd.
Room 1108, 11th Floor, East Building, Block E, No. 6 Keyuan 3rd Road, Xiaohuangpu Neighborhood Committee, Ronggui Subdistrict, Shunde District, Foshan City