Apply浸 or brush-on motor reconditioning insulation paint to flat metal, plastic, and glass surfaces for a moisture-proof, insulating, and protective topcoat.
96013-2401: The eco-friendly, benzene-free moisture-curing and self-drying three-in-one coating is formulated with modified nano-polyurethane monomers, a promoter, a curing agent, a fluorescent additive, esters, and more—supplied as a single-component paint.
 

Product Features
Eco-friendly with low odor, free from benzene-based solvents, and featuring low VOC levels.
Product solids content: 25–40% (available upon customer request). At room temperature, it exhibits low viscosity and excellent compatibility with green oil. After curing, the resulting coating film demonstrates high electrical insulation strength, outstanding moisture and water resistance, superior yellowing resistance, rapid drying even in humid conditions, strong adhesion, and exceptional hardness. Additionally, it offers excellent heat resistance, capable of enduring temperatures up to ≥260°C.
 

Product applications:
PCB circuit boards: three-proof insulation protection via spraying, brushing, and dipping.
Apply浸 or brush-on motor reconditioning insulation paint to plane metal, plastic, and glass surfaces for moisture-proof, insulating, and protective topcoating.

Performance metrics:

Using the process
Paint mixing process: This product should be poured directly into a metal container for use. Use it all on the same day—it must not be poured back into the original bottle, as this could cause the paint to dry out or gel, rendering it unusable.
Curing process:
1.1 Natural Moisture-Absorbing Curing/Air-Drying Curing: Typically, the coating liquid is applied directly onto the PCB surface using spray/brush coating or dip-coating methods. After allowing the coating to level out on the surface for 1 minute, let it air-dry naturally for 6 hours (shorten this duration slightly in winter or humid conditions). Once done, proceed to the next process step. Full curing requires at least 1 day.
1.2 Double 85 (85°C + 85% humidity) Curing: When the film thickness is ≤60 microns, achieve initial dryness within 5–10 minutes under Double 85 conditions, followed by a 12-hour test period during which all performance criteria pass.
 

Packaging
This product comes in a single-component package, sealed and packed in iron drums—either 1 kg per drum or in drums of custom specifications, as agreed.
 

Storage
During storage and use of this product, do not pour the paint back into its original container or expose it to moisture or heat.
The product must be stored in a sealed iron container and has a shelf life of 3 months.

Sales Contact:
Guangdong Shunde DADIYUAN New Materials Co., Ltd.
Address: Room 1108, Building A, E-Block, Xuri Science Park, No. 6 Keyuan 3rd Road, Gaoli New Area, Ronggui District, Shunde County, Guangdong Province
Tel: 0757-28883318 Fax: 0757-26610503
Mobile: 13924577396 13923247198
Email: sales@dad1688.com
Website: www.dad1688.com
1. Due to product improvements, the manual content may change without prior notice. Please contact your sales representative to request the latest version.
2. Our company strictly adheres to relevant product standards to ensure quality and deliver products (customized products will be provided as agreed upon by both parties). Given the diverse and ever-changing conditions under which these products may be used—conditions beyond our control—we strongly advise users to conduct preliminary tests and evaluations based on the information outlined in the product manual and the recommended construction guidelines, thereby independently determining the product’s suitability for their specific application needs.