Product Performance:
Appearance: Brownish-brown and transparent, compliant with national flame-retardant standards, free from mechanical impurities.
Odor: Odor-free (no smell during stator operation after curing).
Viscosity: 10–20 seconds (No. 4 viscosity cup, 23±1°C).
Flame-retardant: The insulating varnish is neither flammable nor explosive under normal temperature and ambient conditions.

Product features:
Good insulation performance, stable and consistent resistance, and excellent moisture resistance.
Oil-resistant, arc-resistant, quick-drying, with a glossy and full-bodied paint film;
Heat resistance rating ranges from Class B to Class F;
Has passed RoHS environmental product testing and certification.

Product applications:
Motor coils, stator, windings;
High- and low-frequency electronic transformers, ballasts;
Not suitable for use in enclosed motors.

Important notes:
This product is non-flammable and non-explosive. When using it, ensure proper gas collection and controlled release, and maintain adequate ventilation in the usage area.
This product is a quick-drying formulation and should not be mixed with products from different systems.

Storage:
The shelf life is 6 months at temperatures below 35℃. If stored beyond this period, the product can still be safely used after passing inspection.
Construction process:
 

Paint Mixing:
The ratio of paint to thinner is 1:0–1, and the application viscosity should be maintained at 9–12 seconds (using a No. 4 viscosity cup). If the viscosity exceeds the upper limit of the recommended application range, adjust it back within the desired range using the specially formulated thinner.
 

Oil-soaked:
Immerse the workpiece for about 1 minute, depending on its size, until no more bubbles emerge. When the surrounding environment and air remain consistently humid, preheat the workpiece at approximately 100°C for 10 minutes—or until it is thoroughly heated. Allow the workpiece to cool down to 50–60°C before immersing it in the oil bath. (This oil-immersion method helps enhance rust prevention and improves the penetration of the coating into the stator.)
Drying and Curing:
1. Baking and Curing: For assembly-line operations, items are directly fed into the baking oven without the need for drying. For non-line operations, allow the items to air-dry at room temperature for 15 minutes or longer before placing them in the oven for low-temperature baking at temperatures below 100°C for 1–2 hours.
2. Natural Gas (Wind) Drying for Curing: After the stator is coated with varnish, place it in a well-ventilated, dry area (ensuring good airflow within the frame) and allow it to air-dry for 72 hours. This will enable the varnish film to cure properly—performance may vary, so use this information as a general guideline only.

Coating film curing performance (for reference only):

Sales Contact:
Guangdong Shunde DADIYUAN New Materials Co., Ltd.
Address: Room 1108, Building A, Block E, Xuri Science Park, No. 6 Keyuan 3rd Road, Gaoli New Area, Ronggui District, Shunde County, Guangdong Province
Tel: 0757-28883318 Fax: 0757-26610503
Mobile: 13924577396 13923247198
Email: sales@dad1688.com
Website: www.dad1688.com
1. Due to product improvements, the manual content may change without prior notice. Please contact your sales representative to request the latest version.
2. Our company strictly adheres to relevant product standards to ensure quality and deliver products (customized products will be provided as agreed upon by both parties). Given the diverse and ever-changing conditions under which these products are applied—conditions beyond our control—we strongly advise users to conduct preliminary tests and evaluations based on the information outlined in the product manual and the recommended construction guidelines, thereby independently determining the product’s suitability for their specific application needs.